-
The fan delivers stable airflow and high efficiency with minimal maintenance. It supports a wide range of air volumes and pressures, making it suitable for various fume hood sizes and configurations. Available with single-phase or three-phase motors. Ideal for laboratories, chemical handling stations, and research facilities, this fan ensures proper containment and ventilation, helping to maintain a safe working environment. -
The SEAT 15 from SEAT Ventilation is a polypropylene centrifugal fan used in laboratories and most industrial extractions.Its polypropylene volute is suitable for the extraction of corrosive gases with a maximum air flow of 700m³/h and a diameter of 125mm in suction and discharge. This fan is ideal for applications in laboratories, chemical industries, petrochemical plants, pharmaceutical industries, water treatment sites, surface treatment, the food industry, swimming pools, hospitals, universities, and most industrial extractions. -
The SEAT STORM 12 is a polypropylene centrifugal fan designed for the extraction of corrosive gases. It delivers a maximum airflow of 500 m³/h and features a 90 mm diameter at both the inlet and outlet. The fan uses a direct drive system, where the impeller is mounted directly onto the motor shaft. It is available with either single-phase or three-phase motors, and can be equipped with a frequency converter to adapt to specific installation needs.
The STORM 12 is a high-pressure fan ideal for use in storage cabinets, extraction arms, scrubbers, sensors, and filtration units.
-
The SEAT STORM 14 is a centrifugal fan made of polypropylene, specifically engineered for extracting corrosive gases. It offers a maximum airflow of 1000 m³/h and features a 125 mm diameter on both the inlet and outlet sides. With a direct drive system, the impeller is mounted directly onto the motor shaft. The fan is available with either single-phase or three-phase motors, and can be equipped with a frequency inverter to suit your installation requirements.
This high-pressure fan is ideal for applications such as storage cabinets, extraction arms, scrubbers, sensors, and filtration units.
-
The SEAT STORM 16 is a polypropylene centrifugal fan designed for the extraction of corrosive gases, delivering a maximum airflow of 1800 m³/h with a 160 mm diameter on both the inlet and outlet sides.
Featuring a direct drive system, the turbine is mounted directly onto the motor shaft. It is available with single-phase or three-phase motors and can be equipped with a frequency converter to suit specific installation needs.
This high-pressure fan is ideal for use in storage cabinets, extraction arms, scrubbers, sensors, and filtration units.
-
Wet Scrubber - Maxiscrub 1000, available in two models, MSC08-X082 and MSC10-X082, stands as a transformative solution for air purification in industrial settings. The primary distinction lies in the length of duct connections, with MSC08-X082 featuring 200mm connections and MSC10-X082 offering longer 250mm connections. Beyond this difference, both models share a host of exceptional features and optional add-ons. -
This is a PVC damper for fume hood ducting. It allows lab users to balance the airflow of their fume hood. This system automatically controls the damper position to continuously achieve a predetermined face velocity required for the fume hood. -
This fume hood model has an electrogalvanised steel with baked epoxy polyester coating hood that comes with dual glass sides. The main feature of this particular series is the sash material made from polycarbonate, with vertical flip open configuration (comes in 2 pieces). -
Designed with portability and functionality in mind, Downdraft Ductless Fume Hood meets all modern laboratory needs. With unrestricted viewing from all sides, this fume hood is a perfect unit for educational and demonstration purposes. -
Mobile and highly functional ductless fume hood. Equipped with NFX tested filtration system, our ductless fume hood comes with high performance activated carbon filters designed to remove chemical fumes effectively. Available in three size variations: 4 feet, 5 feet and 6 feet. -
Hose made of PVC and suitable for extraction of fumes - recommended for industries that involve welding in their processes. This unit comes with a wall mounting bracket as standard. It comes in two sizes: 2 metres and 3 metres. -
An extraction arm that is suitable for a wide range of applications in the metalwork, automotive, food, and engineering industry. The arm consists of hollow air ducts and external support mechanism to provide minimum airflow resistance. This unit comes in two sizes: 2 metres and 3 metres. -
A variable air volume or VAV System varies the air quantity to maintain a consistent fume hood face velocity so that it will not drop below the preset level by automating that frequency inverter (separate product). It is a popular safety system for all modern fume hoods. The following are the main features of this model:- European technology
- Pre & post purge functions/auto-off and maintenance timer
- Constantly ensure optimal performance regardless of sash height
- Conserve electricity and air conditioning
- Designed in accordance with DOSH requirements
- Designed in accordance with BS/EN 14175.
-
The METHOD AL 01 Fume Hood Airflow Monitor is a simple to install, affordable safety system for fume hoods. The unit main function is to indicate the safe level of air flow in laboratory fume hoods. The LCD provides continuous viewing of face velocity and will warn users of unsafe conditions. An alarm will be activated when air flow falls below preset level. -
Reduce clutter and store your supplies in the hood with this specially designed fume hood shelf. The white polypropylene made shelf lifts items of the worktop. -
This unit is the most common and basic unit fume hood available. Packed with features, this series is sleekly designed for performance and convenience. This ASHRAE 110 tested MEH model is suitable for general lab application and can deal with various common acid and solvents (except perchloric acid, you can check the MPH Series). The MEH Series comes in four size variations: 4 feet, 5 feet, 6 feet, and 8 feet. Please specify your requirement if you would like to request for quotation. -
A more economical and robustly designed fume hood for general laboratory application. This unit is one of the most common and basic fume hoods available in the market that suits your laboratory need. This MEB model is suitable for general lab application and can deal with various common acid and solvents. Highly affordable and suitable for various daily applications (except perchloric acid, hydrofluoric acid and radioisotope applications). The MEB Series comes in four size variations: 3 feet, 4 feet, 5 feet, and 6 feet. Please specify your requirement if you would like to request for quotation. -
This fume extractor arm unit is 3 inches in diameter. Suitable to use for soldering fumes, chemical fumes, dust extraction. Made with polypropylene, this white colour unit can reach length from approximately 0.8 metres up to 1.2 metres. This unit comes with a mounting bracket. The main features of this EXA-982-1A model are:- Flexible - can be bent, twisted, and turned easily without breaking
- Self-supporting
- No internal supports- airflow increased by up to 50% over externally supported design
- Expandable- Diameter can be increased
- Heavy-duty - flame retardant
- Durable - chemical and abrasion resistant
- Safe - ensure compliance with safety regulations.
-
This fume extractor arm unit is 3 inches in diameter. Suitable to use for soldering fumes, chemical fumes, solvent odours, sanding & mixing dust extraction. Made with heat-resistant polypropylene, this white colour unit can reach length from 1.5 metres up to 2.5 metres. This unit comes with a 2 feet swing boom. The main features of this EXA-982-3 model are:- Flexible - can be bent, twisted, and turned easily without breaking
- Self-supporting
- No internal supports- airflow increased by up to 50% over externally supported design
- Expandable- Diameter can be increased
- Heavy-duty - flame retardant
- Durable - chemical and abrasion resistant
- Safe - ensure compliance with safety regulations.
-
A robustly designed fume hood for laboratories that deal with hydrofluoric acid. In addition, this MEBF model is also suitable for general laboratory application for various common acid and solvents. The MEBF Series comes in four size variations: 3 feet, 4 feet, 5 feet, and 6 feet. Please specify your requirement if you would like to request for quotation. -
Technology from France, this 6" polypropylene centrifugal exhaust fan designed to extract highly corrosive gases with a maximum airflow of 1500mch and the inlet and outlet dimension of 160mm. Available in ATEX and Explosion Proof version, contact us to learn more. -
Technology from France, this 8" polypropylene centrifugal exhaust fan designed to extract highly corrosive gases with a maximum airflow of 2500mch and the inlet and outlet dimension of 200mm. Available in ATEX and Explosion Proof version, contact us to learn more. -
Technology from France, this 10" polypropylene centrifugal exhaust fan designed to extract highly corrosive gases with a maximum airflow of 4500mch and the inlet and outlet dimension of 250mm. Available in ATEX and Explosion Proof version, contact us to learn more. -
Technology from France, this 12" polypropylene centrifugal exhaust fan designed to extract highly corrosive gases with a maximum airflow of 9000mch and the inlet and outlet dimension of 315mm. Available in ATEX and Explosion Proof version, contact us to learn more. -
Technology from Italy with over 50 years' experience and significant investments in Research and Development has enabled this VSB series to provide a high-quality 8" centrifugal fans. This series also has ATEX-certified and Explosion Proof versions. Please let us know if you need a consultation with a suitable extraction fan for your fume cupboards. -
Technology from Italy with over 50 years' experience and significant investments in Research and Development has enabled this VSB series to provide a high-quality 10" centrifugal fans. This series also has ATEX-certified and Explosion Proof versions. Please let us know if you need a consultation with a suitable extraction fan for your fume cupboards. -
This mini fume hood model has an electrogalvanised steel main body for maximum durability. The main feature of this particular series is the sash material made from polycarbonate, with a vertical flip open configuration (comes in 2 pieces). The unit is available with an activated carbon filter. The small size and low power consumption make it easy to move and transport this unit if required. -
This fume hood is a necessity when dealing with the highly explosive and flammable perchloric acid. With an inbuilt wash down system, integral work surfaces and drainage throughs, the fumes are prevented from accumulating potentially reactive perchloric salts. METHOD perchloric acid fume hood has a fully welded stainless steel 316 inner linear material complete with a drain through. This unit is equipped with a washdown system that provides thorough cleaning. Available three size variations: in 4 feet, 5 feet, and 6 feet. Please specify your requirement if you would like to request for quotation. -
This is an ideal extractor for laboratory environments. A convenient and movable fume extractor arm designed for use where space is a constraint. This model gives users the flexibility to perform their tests and experiments from the work desk safely. -
METHOD MPP Polypropylene Fume Hood is a fully PP constructed fume hood designed to handle the most corrosive application and environment. Suitable for a salt-laden environment, the MPP fume hood ensures durability and performance against highly corrosive chemicals and fumes. The MPP Series comes in three size variations: 4 feet, 5 feet, and 6 feet. Please specify your requirement if you would like to request for quotation. -
A versatile and portable fume extraction system. This EXA-0987-1 model features chemical resistant PVC fan with blower motor rated at 100,000 hour continuous duty hours. -
Indoor air quality remains one of the most challenging problems faced in laboratories and hospitals today. The V2500 high-performance air purifier is equipped with Virus Guard HEPA Filter that inactivates airborne virus by 99.99% and dual high efficiency activated carbon to remove heavy gas pollutants and odour. -
METHOD MRX Radioisotope fume hoods are made to offer the highest level of personnel and environment protection from radio-chemical applications in laboratories. It ensures the quick and effective removal of all hazardous radioactive fumes from spillages, handling or storing from the work chamber. The MRX Series comes in three size variations: 4 feet, 5 feet, and 6 feet. Please specify your requirement if you would like to request for quotation.
Need quick assistance? You can reach out to us directly via WhatsApp or email us at [email protected]
