G) Chemical Lab Sink and Waste System (Polypropylene)

METHOD's wide range of chemical resistant polypropylene sink and waste system provides an affordable yet durable solution to all your laboratory drainage needs.

Drip Cup

MD150 - Round Drip Cup

These 170mm circular drip cups are injection moulded from polypropylene co-polymer resin and very suitable for fume cupboard work-tops. Supplied complete with back-nut.

MM22 Oval Drip Cup

Our oval-shaped drip cups are commonly used on work-tops of fume hoods. Injection moulded from polypropylene co-polymer resin. Supplied complete with back-nut.

PP 80D Oval Drip Cup

Our PP 80D oval drip cups are made of polypropylene co-polymer resin. This drip cup type is large adn suitable for fume hood and reagent shelves drainage. Nett weight : 320g

PP70D Round Drip Cup

Our new PP 70D round drip cup is made of polypropylene and suitable to be used for fume hoods and to replace larger sinks when space is a contraint. Net weight : 300g

Lab Sink

MS 313

Injection moulded from polypropylene co-polymer resin, with a self draining base. These squarish P.P. sinks blend well into any laboratory work bench. Extremely durable. Black / White / Grey Colour

MS 400

Injection moulded from polypropylene co-polymer resin, with a self draining base. Designed for mounting on top or underside of work benches. Black / White / Grey Colour

MS 505

Our rectangular sinks with its self draining base are injection moulded from polypropylene co-polymer resin. Designed for mounting on top or underside of work benches. Black / White / Grey Colour

MS 808

Our rectangular sinks with its self draining base are injection moulded from polypropylene co-polymer resin. Designed for mounting on top or underside of work benches. Black / White / Grey Colour

MS 855 (NEW)

Large Polypropylene Lab Sink. Size: 855 x 480 x 365mm. Suitable for Island Bench. Black Colour Only.

Others

MS600 OverflowTube

A polypropylene overflow stand tube. Suitable with all Method sink waste. Available in 160mm and 260mm length.

MS70P Plug Holder

This drain plug with a simple holder is made of polypropylene and suitable for use with all Method sink waste. Net weight: 10g

MS810

The standard sink waste used with all Method sink (Except MS 855). Comes with washer and nut.

MS820 Plug and Chain

Drain plug are injection moulded from polypropylene co-polymer resin and attached to either 500mm long ball chain or stainless steel link chain.

MS850

With a 85mm diameter flange, this sink waste is ideal for sinks with larger outlet. Comes with washer and nut.

MT 2300V Dilution Recovery Trap (Vulc. Equivalent)

Injection moulded from polypropylene co-polymer resin. This trap has a capacity of 2.3 litres and an adjustable inlet to accomodate varying height connection of outlet. Suitable to be used with Vulcathene or equivalent chemical waste discharge pipe system. Net weight: 520g

MT2300 Dilution Recovery Trap

MT 2300 is injection moulded from polypropylene co-polymer resin, these dilution recovery trap has a capacity of 2.3 litres.

MT800 Bottle Trap

Injection moulded from polypropylene co-polymer resin, these anti-siphon bottle traps come with inlet of 1½" BSP connection.

MV88 Anti-Vac Bottle Trap

Injection moulded from polypropylene co-polymer resin, this bottle trap inlet is adjustable, 40mm to 100mm to accomodate varying height differences for connection to outlet. Suitable to be used with Vulcathene or equivalent chemical saste discharge pipe system. Nett weight : 270g